Installation Manual

INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
IMPORTANT!
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
4
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
KRFE008T_REV_A00
5mm
FIT AND SECURE
3
3.1
4MM
3.2
Center the rack and tighten fully. Finish off by placing M8 Nut Caps over the M8 Nyloc Nuts.
13mm
Center your Tray on the vehicle positioning
all the feet so that they rest in the gutters.
Position the rear rack so that the LH and RH
rear Legs measure 190mm from the rear of
the gutter as shown. Fully tighten all rear
Rack Bolts to secure the Tray.
Position the front rack as shown in 3.1. Fully
tighten all rear Rack Bolts to secure the Tray.
Tighten all Gutter Clamps Button Head Bolts.
5mm
Tightening Torque 20Nm
Make sure there are no movement on
the rack after fully tightening all the
fasteners.
190mm
50mm