Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3 KRFE008T_REV_A00
FIT AND SECURE
2
2.1
2.2
2.3
Flip the Tray so that the bottom of the Tray
faces up.
Insert four M8x30 Hex Bolts into the
machined slots of the slats as shown.
Insert four M8x16 Hex Bolts into the
machined slots of the slats as shown.
Before continuing, ensure that your wind
deflector is fitted according to Fitment guide
WDST006.
Loosely assemble the Legs & Spacers
(Item 2, 3, 4 & 5) as shown, slats indicated in
2.2 using M8 Flat Washers and M8 Nyloc
Nuts included in the Leg sets.
Refer to LASSUNI fitment guide.
A
B
B
A
A
A
A
A
5
5
5
5
5
3
3
4
2
2
2