Installation Manual

© 2020 FRONT RUNNER VEHICLE OUTFITTERS
6 FADR001_REV_A00
4
FIT AND SECURE
3
2.2
3.1
3.2
4MM
3.3
Center the rack and tighten fully. Finish off by fitting the M8 Nut Caps (Item 9) on the M8 Nyloc Nuts.
Fit your Roof Rack to the Foot Rails using
M8x20 Hex Bolts, M8x16x1.6SS Flat Washers
and M8 Nyloc Nuts (Items 6, 11 & 10) as
shown.
Make sure that the wind deflector is
installed before you proceed to the next
step.
6
11
10
9
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
IMPORTANT!
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
13mm