Installation Manual

GOFR001_REV_A02
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.1
2.2
2.3
With the help of a friend, hold your Front
Runner Roof Rack over your vehicle's Flush
Rails. Find the best position to mount.
The Rack should sit level to the ground, not
the vehicle's roof line, or slanting slightly
down toward the front.
Find the best position to mount the Feet
to the Rack using the first or second Slat.
Remove the Rack from the vehicle.
Fit the Rail Foot Base (Item 2) to the slat by
loosely fastening it with two M8 Flat
Washers (Item 3) and two M8 Nyloc Nuts
(Item 4).
Repeat this step for the other Feet.
Flip the Rack so that the bottom of the
Rack faces up. Insert two M8 x 16 Hex Bolts
(Item 1) into the Slats machined slots that
you have identified.
1
1
4
3
2