Installation Manual

2
4
3
1
1
JCHO014_REV_A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Secure the Cross Strap (Item 4) to the Top
Straps (Item 1) using two M5 Nyloc Nuts and
two M5 x 10 x 1SS Flat Washers
(Items 2 & 3) as shown.
Loosely fit the Latchs (Item 7) to the Top
Straps (Item 1) using M4 x 10 Button
heads, M4 Flat Washers and M4 Nyloc Nuts
(Items 6, 8 & 9) as shown.
In 2.6 you will do final adjustments to
the Latches before fully tightening.
Secure the two Latch Keepers (Item 11) to
the Jerry Can Holder Base (Item 5) using
four M5 x 12 Button Heads, four M5 Flat
Washers and four M5 Nyloc Nuts (Items 10,
3 & 2) as shown.
9
8
7
1
6
8MM
3mm
8MM
10
11
5
3
2