Installation Manual

JCHO013_REV_A00
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Secure the Cross Strap (Item 4) to the Top
Strap (Item 1) using a M5 Nyloc Nut and
M5 x 10 x 1SS Flat Washer (Items 2 & 3)
as shown.
Loosely fit the Latch (Item 7) to the Top
Strap (Item 1) using M4 x 10 Button
head, M4 Flat Washers and M4 Nyloc Nuts
(Items 6, 8 & 9) as shown.
In Step 2.6 you will do final adjustments to
the Latch before fully tightening.
Secure the Latch Keeper (Item 11) to the
Jerry Can Holder Base (Item 5) using two
M5 x 12 Button Heads, two M5 Flat Washers
and Two M5 Nyloc Nuts (Items 10, 3 & 2) as
shown.
2
4
3
1
9
8
7
1
6
8MM
10
11
5
3
2
3mm
8MM