Installation Manual

GBHO013_REV_A00
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Assemble the Base (Item 2) to the Frame
(Item 1) using M6 x 12 Button Head Bolts,
M6 x 12 x 1 SS Flat Washers and M6 Nyloc
Nuts (Items 7, 8 & 10) as shown.
Place M6 Nut Caps (Item 6) on the Nyloc
Nuts to finish of.
Assemble the Hinges (Item 3) to the Frame
(Item 1) using M6 x 12 Button Head Bolts,
M6 x 12 x 1 SS Flat Washers, M6 Nylon
Washers and M6 Nyloc Nuts (Items 7, 8, 9 &
10) as shown.
The M6 Nylon Washers (Item 9) go between
the Frame and the Hinge.
You will need to set the Latch and Catch
Brackets (Items 4 & 5) according to the size
of Gas/Propane bottle you are fitting.
Do this by placing the bottle on the Base.
Align the appropriate holes in the Latch and
Catch Brackets with the holes in the Hinges.
See 2.4 for assembly of the Latch and Catch
Bracket.
10
8
2
1
7
6
6
8
8
7
6
9
3
3
1