Installation Manual

4
MOUNTING TO a Drawer System or Wooden Deck
REV_A02
Congratulations, you have completed your installation. Take a step back and admire your work. Good Job!
()
c
MOUNTING TO LOAD BAY using rivnuts
Place your Fridge Slide in the desired location. Open the Fridge Slide and mark the position of the six
mounting points as indicated by the arrows onto the load bay. Remove the Fridge Slider.
()
A
Drill a 9 mm hole on each of the markings. Insert and crimp a M6 Rivnut into each hole. Place the Fridge
Slide back in position and secure using the M6 x 30 Hex Bolts, M6 Spring Washers and M6 Flat Washers
supplied.
() B