Installation Manual

4
MOUNTING TO LOAD BAY using rivnuts
Place your Fridge Slide in the desired location. Open the Fridge Slide and mark the position of the six
mounting points as indicated by the arrows onto the load bay. Remove the Fridge Slider.
()
A
Drill a 9 mm hole on each of the markings. Insert and crimp a M6 Rivnut into each hole. Place the Fridge
Slide back in position and secure using the M6 x 30 Hex Bolts, M6 Spring Washers and M6 Flat Washers
supplied.
()
B
MOUNTING TO LOAD BAY using nuts & bolts
REV_A01
Place your Fridge Slide in the desired location. Open the Fridge Slide and mark the position of the six
mounting points as indicated by the arrows onto the load bay. Remove the Fridge Slider.
()
A
Drill a 9 mm hole on each of the markings. Place the Fridge Slide back in position and secure using the
M6 x 30 Hex Bolts, M6 Spring Washers and M6 Flat Washers and M6 Nyloc Nuts supplied.
()
B