Installation Manual

BBTH004_REV_A00
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.1
2.2
2.3
Drill a 6.5mm hole in the vehicle body
as shown using the rear corner hole
of the bracket as a guide. Secure with
fasteners shown in 1.1.
Place the battery in the bottom frame.
Place the top clamp over the battery and
secure with the fasterners shown in 1.1
Place the battery bracket bottom frame
in the engine bay as shown. Align the 3
holes with the welded nuts in the vehicles
body and secure. Refer to 1.1
10MM
10MM
10MM
10MM
6.5MM
10MM
4MM
4