Installation Manual

GET ORGANIZED

Here is what you are looking at:

Note: For vehicle models from late 2012 onwards with an alarm switch/sensor for the vehicle's bonnet,

please refer to Page 5.

REV_A01

Familiarize yourself with the parts and then step away from the work area and read through these

instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.

()

You will need:

 10 mm Flat and Socket Wrench

 4 mm Hex Key

 Drill machine & 6.5 mm Drill bit

 Marking pen

 Anti-Rust Paint/Coating for Step 2C

Item # Quantity Description

1 1 M6x16 COUNTERSUNK BOLT

2 2 M10 FLAT WASHER

3 1 SUPPORT BRACKET PART 1

4 1 SUPPORT BRACKET PART 2

5 8 M6x19 FLAT WASHER

6 5 M6 NYLOC NUT

7 2 M6 HEX NUT

8 2 M6 SPRING WASHER

9 2 J-BOLT

10 2 M6x25 HEX BOLT

11 1 M6 FLAT WASHER

12 1 BATTERY BRACKET

13 1 M6x25 COUNTERSUNK BOLT

14 1 BATTERY STRAP