Installation Manual

BBRA005_REV_A00
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Determine where on the Battery Bracket
you would like to mount the Battery Device
Mounting Plate (Item 7). Using a marker pen,
mark the two holes.
Using a 6.5mm drill bit and drill, drill on your
marked location.
Using two M6 x16 Countersink Screws, two
M6 x 19 x 1SS Flat Washers, two M6 x 12 x
1SS Flat Washers and two M6 Nyloc Nuts
(Items 1, 2, 3 & 4) fasten the Battery Device
Mounting Plate (Item 7) to the Battery
Bracket.
CTEK (D250S DUAL) INSTALLATION
Using four M4 x 25 Button Head, eight
M4 Flat Washers and four M4 Nyloc Nuts
(Items 5, 6 & 8), fasten the CTEK to the
Battery Device Mounting Plate (Item 7).
7
6.5mm
BATTERY BRACKET
(SOLD SEPARTELY)
1
2
3
4
7
8
6
6
5
CTEK D250S
(SOLD SEPARTELY)
7mm
2.5mm
7mm
2.5mm