User's Manual

which indicate the power is low. Vibration will be turned off automatically when power is low.
Sleep(Power Saving) Mode:
The Steering Wheel is built-in a Sleep (Power Saving) Mode, it will be activated under the following conditions:
a) When the Steering Wheel is not detected by a relevant receiver and no buttons activated for 1 minute,
b) Synchronization has been done but no buttons activated for 5 minutes,
The Connection Indicator (Green and red LEDs) will go out when the sleep mode is activated, simply press
the central big button to recall the function.
Important:
Do not turn the steering wheel and keep the Steering Wheel at its natural position during powering on and synchronization as
the steering wheel calibrates itself for precise centering, otherwise a malfunction of steering control will be occurred.
Automatic Synchronization:
The S
y
nchronization between the receiver and the steerin
g
wheel is automaticall
y
detected when the steerin
g
wheel is switched ON,
Force Connection is required if the Automatic Synchronization is fail.
Force Connection:
Simply press once the " FC " Button of the Receiver and the central big button respectively when the Steering Wheel is switched ON.
The Synchroniziation will be automatically activated, the relevant LED will light up when the synchronization is successful.
After Synchronization is done, the LED indicator of the Player's I/D will light up as below status:
For PC Format - The first LED indicator of the Player's I/D which is on the top of the receiver will light up,
The Player's I/D LED indicator will light up for relevant player.