User's Manual

How to program:

This Steering Wheel is built-in a programmable feature, you can program any of a button to a designated button to make your own

driving comfort and experience, just follow the program procedure, to enjoy a simple tailor made button configuration for a great driving

fun.

There are 6 Programmable Buttons equipped with programmable features:

Digital Analog

Left Lever □□(Analog) □(Analog) 3

Right Lever ╳╳(Analog) ╳(Analog) 1

Gear Shift Stick Forward R2 R2(Analog) R2(Analog) 7

Gear Shift Stick Backward L2 L2(Analog) L2(Analog) 2

Left PEDAL □□(Analog) □(Analog) 3

Right PEDAL ╳╳(Analog) ╳(Analog) 1

Program Steps:

The green LED under the central big button is an indicator of program;

a) Press and hold the PRG button to enter into Program Mode , the program LED lights up,

b) Press any of the six programmable button which is desired to program once from the Programmable Button Table listed above,

the program LED will start to blink,

c) Then, press any of a button once which is desired to program to the selected Programmable Button, the program LED will then light up,

the program is successful,

d)To program the next key, Please repeat step b and c,

e) Press PRG button to save the result of program and exit, the program LED goes out.

Button Relocation:

This Steering Wheel is built-in a Button Relocation feature, it is allowed the Relocated Buttons exchange their position with each other to the

designated Relocated Button as listed in the following :

△ , ○ , X , □ , L1 , L2 , R1 , R2 , R3, L3

Button Relocation Procedure:

Default MAP Table of Programmable Button

Key name

PS3

PS2