User Manual

IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
General This manual contains important instructions for the Fronius String Control
250/25, that must be followed during installation and maintenance.
The Fronius String Control 250/25 is designed and tested according to
international safety requirements, but as with all electrical and electronic
equipment, certain precautions must be observed when installing and/or
operating the Fronius String Control 250/25.
To reduce the risk of personal injury and to ensure the safe installation
and operation of the Fronius String Control 250/25, you must carefully
read and follow all instructions and safety instructions in this manual.
Safety Instruc-
tions
The following section “Safety Instructions“ contains different warnings. A
warning describes a hazard to equipment or personnel. It calls attention to
a procedure or practice, which, if not correctly performed or adhered to,
could result in damage to or destruction of part or all of the Fronius string
Control 250/25 and/or other equipment connected to the Fronius String
Control 250/25 or personal injury.
All electrical installations must be made in accordance with the National
Electrical Code, ANSI/NFPA 70, and any other codes and regulations
applicable to the installation site.
For installations in Canada the installations must be done in accordance
with applicable Canadian standards.
Electrical
installations