User Manual For DATCOM Components

21
General
Different modems can be connected to the Datalogger for reading system
data via modem. All modems described in the following have been tested
by Fronius. The „Solar.access“ software enables easy configuration.
You can also use other 56K modems that support the V.90 standard.
However, please note the following:
- Only the modems listed below are guaranteed to work correctly with
the Datalogger
- When using other modems, you may be required to modify the initia-
lization string (see chapter „Solar.access“)
1. Tixi Message Modem
The Datalogger supports various Tixi Message Modems. Message modems
can be used to send service messages as a fax or e-mail. There is also an
ISDN version of this modem that is also compatible with the Datalogger.
IMPORTANT When the ISDN Message Modem is connected to the Data-
logger, it will only be possible to dial in with an ISDN modem.
2. US Robotics (or 3COM Courier) „V.Everything 56 K“
NOTE Automatic call acceptance must be activated on the modem
in order to function correctly with the Datalogger.
To activate automatic call acceptance:
- Set DIP switches (5) and (9) underneath the modem to the „OFF“
position
Modem