User Manual For DATCOM Components

19
Datalogger
General
The Datalogger is available as a card or box. The Datalogger is required
for networking several DATCOM components with the Fronius IG or Froni-
us IG Plus.
NOTE The entire network may not contain more than one Datalogger.
The Datalogger is available in the following versions
- Datalogger pro as card and box
- Datalogger easy as card or box
- Datalogger & Interface as box
- Datalogger Web
As the only system component with a real-time clock, the Datalogger is
responsible for system management. It continuously identifies which
devices are in the system and regulates the data traffic between the
individual system components.
The Datalogger also establishes PC connections for external data proces-
sing. In addition, Datalogger Pro and Datalogger & Interface record data
from all inverters and sensor cards / boxes in the system.
Datalogger Pro and Datalogger & Interface can manage and store opera-
ting data for the following max. number of system components:
- 100 solar inverters from the Fronius IG or Fronius IG Plus series
(several types may be combined, e.g. IG 15 and IG 60 with an inter-
nal and external housing)
- 10 sensor cards / boxes
- 10 public display cards / boxes
- 1 interface card / box
- 200 string controls
NOTE Datalogger easy can only record data from the inverter and
sensor card / box using Address 1. The data from the remaining
components are saved unrestricted.
General
(continued)
Important „Solar.access“ is only dealt with briefly in these operation in-
structions. For a more detailed explanation of the functions of
„Solar.access“ and „Solar.web,“ please see the respective help.