User Manual For DATCOM Components

16
Power Pack Each DATCOM component (both
card or box) is equipped with a 12
V power pack connection socket.
NOTE If a system only has
one Fronius IG or Fronius
IG Plus but more than 3
DATCOM components, the
Com card in the Fronius IG
or Fronius IG Plus may not
provide sufficient power for
all DATCOM components.
This means that the green
LED would not light up on
all DATCOM components.
In this case, the additional
power pack should be
plugged into one of the
DATCOM components with
no green LED.
The note provided above is also valid for a DATCOM component that is
located in a Datalogger Web.
One power pack can supply up to eight DATCOM components. No additi-
onal supply cables are needed for this. The data communication cable is
used to provide power between components.
NOTE The power pack available from Fronius was designed spe-
cifically for DATCOM components. Do not use any other power
pack.
Important The scope of delivery for the power pack includes a power
adapter for the following regions:
- Australia
- EU
- UK
- USA