User Manual For DATCOM Components

10
The data connection for the SolarNet client uses 8-pin data cables (1:1-
connection) and RJ-45 plugs. A commercially-available crimping tool can
be used to easily adjust the cable to the desired length.
Data Cable
This requires:
(1) One 8-pin ribbon cable
(2) Two RJ45 plugs (8-pin telephone plug)
(3) One crimping tool
The items mentioned above are available from Fronius under the follo-
wing item numbers:
(1) 8-pin ribbon cable 100 m (328 ft) roll (40,0003,0384)
(2) RJ 45 plug (43,0003,0815)
(3) Crimping tool (42,0435,0019)
Proceed as follows to assemble the
data cables:
- Shorten cable to the desired
length using the crimping tool
- Insulate outer insulation of the
cable ends using the crimping
tool
NOTE When fitting RJ45
plugs, please note the
following: The wires must
have the same position in
both plugs (e.g. black =
PIN1, white =PIN8)
- Insert RJ45 plug
(1)
(2)
(2)
(3)
black
white
black
white
RJ 45