User Manual For DATCOM Components

42
„Solar.access“ installation is mostly automatic and requires no previous
knowledge.
1. Close all applications and programs on your PC
2. Insert the CD-ROM that came with the Datalogger into the drive
3. Select the „Fronius Solar.access“ folder
4. Start the „setup.exe“ file contained therein
5. Follow the instructions of the installation software (Wizard)
The selection window for the required database appears.
6. Select the recommended database from the selection menu
Installing
Solar.access
- Connect the Datalogger to a serial or USB interface on your PC
Important Connecting the Datalogger via the USB interface requires the
installation of the USB driver.
- When the Datalogger is connected via the USB interface, „New Hard-
ware Found“ appears in the display window.
- Follow the Wizard instructions to search for the new hardware.
- The USB driver for the Datalogger is included in the scope of delivery
for „Solar.access.“
If you installed „Solar.access“ to the predefined folder, the USB driver is
located at „C:\ Program Files \ Fronius \ Austria \ Solar.access \ Driver \ USB.“
- Enter the path for driver installation and follow the Wizard instructions.
The USB interface is setup and „Solar.access“ is ready for use.
Establishing
Datalogger /
PC Connection