Sensor Specifications

SENSORS FRONIUS IG - SERIES
page 3/3
date 20.04.2005
IRRADIATION SENSOR
This sensor is for measuring the irradiated energy and is in most
cases fixed on the frame of the solar module.
Comparison of the irradiated power to thus of the inverter gives a
rapid overview on the proper operation of the pv-system.
TECHNICAL DATA
Sensor Mono crystalline Si-Sensor
Sensor voltage
approx. 70mV at 1000W/m
2
(exact calibration voltage is written on the sensor)
Accuracy
± 5% (average over a year)
Ambient temperature -40°C to +85°C; -40 F to 185 F
Design Sensor is mounted on Z-shaped aluminium profile;
Dimensions l x w x h = 110 x 40 x 40 mm
Cable 3m Cu-cable; UV-resistive, ferrules
Max. cable length (distance: Sensor
Card/Box – sensor)
30m
Fronius Art. Nr. 43,0001,1189
Mounting tip
: The sensor comes fixed onto an aluminium profile with
an 8 mm hole. Thus screwing onto the module frame is very easy.
Please mind, that the sensor does not cast any shadow on the
module.