Card

95
EN-US
Connection Ex-
ample
(1) Ripple control signal receiver with 3 relays for effective power limitation
(2) Ripple control signal receiver with 3 relays for power factor limitation
(3) I/Os on Fronius Datamanager 2.0
(4) Loads (e.g., signal light, signal relay)
The ripple control signal receiver and the Fronius Datamanager 2.0 plug are connected to
one another using a 4-pin cable in accordance with the connection diagram.
For distances of greater than 10 m between Fronius Datamanager 2.0 and the ripple con-
trol signal receiver, a shielded cable is recommended.
Settings on the UC Editor:
60 %
30 %
0 %
0,95
0,90
0,85
(1)
(2)
(4)
+
-
IO 2
IO 3
I 4
I 7
I 8
I 9
IO 0
(3)
(1)
(2)