Card

Switch the device to service mode

Inverter with Fronius Datamanager 2.0 plug-in card:

- Switch the IP switch on the Fronius Datamanager 2.0 plug-in card to position A

- Activate the WIFI Access Point via the Setup menu of the inverter

(the performance of this function depends on the inverter software)

Fronius Datamanager Box 2.0:

- Switch the IP switch on the Fronius Datamanager Box 2.0 to position A

The inverter/Fronius Datamanager Box 2.0 establishes the WLAN Access Point. The

WLAN Access Point stays open for one hour.

Connect the end device to the WLAN Access Point

SSID = FRONIUS_240.xxxxx (5–8 digits)

- Search for a network with the name "FRONIUS_240.xxxxx"

- Establish a connection to this network

- Enter password 12345678

(or connect end device and inverter via Ethernet cable)

Enter in the browser:

http://datamanager

192.168.250.181 (IP address for WLAN connection)

169.254.0.180 (IP address for LAN connection)

The start page of the Commissioning Wizard appears.

Stand by

WiFi Access Point

DATCOM

USB

Clock