Smart Meter Manual

Example 1:

Input Battery

Fronius

Ohmpilot

Number

of primary

meters

Number

of secondary

meters

Modbus 0 (M0)

0 4

0 2

0 1

Modbus 1 (M1)

1 3

Example 2:

Input Battery

Fronius

Ohmpilot

Number

of primary

meters

Number

of secondary

meters

Modbus 0 (M0)

1 3

Modbus 1 (M1)

0 4

0 2

0 1

Multi meter sys-

tem - Fronius

GEN24 inverter

If several Fronius Smart Meters are installed, a separate address must be set for each

one (see Set the address of the Fronius Smart Meter on page 15). The primary meter

always receives the address 1. All other meters are numbered consecutively in the

address range from 2 to 14. Different Fronius Smart Meter power categories can be used

together.

IMPORTANT!

Use no more than Use 7 secondary meters in the system. To avoid interference, it is

recommended to install the terminating resistors according to the chapter Terminating

Resistors on page 16.

EN-US