Operation Manual

Package Contents
FRITZ!WLAN Repeater 300E 7
LEDs
1.3 Package Contents
• FRITZ!WLAN Repeater 300E
• one printed quick guide
• one network cable (LAN cable)
LED Condition Meaning
flashing No connection with WLAN base station or
searching for WLAN base station
up to 5 LEDs
are lit up
The more LEDs are lit up, the stronger the
signal of the WLAN radio connection be-
tween the WLAN base station and the
FRITZ!WLAN Repeater
Power flashing
• FRITZ!WLAN Repeater starts
• Updating the firmware of the
FRITZ!WLAN Repeater
on FRITZ!WLAN Repeater is ready for operation
WLAN flashing
• FRITZ!WLAN Repeater adopts WLAN
settings
• Switching WLAN radio network on or off
• Performing WPS
flashing rapid-
ly
WPS procedure was aborted: More than
two WLAN devices are performing WPS at
the same time. Repeat the procedure.
on The WLAN module of the
FRITZ!WLAN Repeater is ready for operation
LAN on A network connection is active to a con-
nected device (network adapter, hub or
switch)
All flashing Factory settings are loaded