Owner's manual

3.7 Electrical fuses in the control device
n Excess current protection switch (9) 15 A (drawer on the side)
(See
Ä Chapter 9.1 ‘Checklist for troubleshooting’ on page 37).
3.8 Material
n The feed amount depends on the size of the grinding set used and is
maximum 50, 100 or 250 ml.
n The feed size also depends on the type and size of the grinding set
and is maximum 7 or 12 mm.
3.9 Final fineness
Up to 10 - 20 µm.
Technical data
- 17 -