Owner manual

Fault description Cause Remedy
No mains connection Plug in mains plug.
Main switch (10) at 0 (OFF) Switch on main switch (I).
Device fuse Check device fuse; fuse insert on the back side
of device 2 x 10 A T (12).
Grinding stock escapes Tensioning device (5) loose Check and re-tension if necessary.
Seal ring is soiled or defective Clean or replace seal ring.
Runs unevenly with strong
vibrations
Masses balanced inadequately Set mass balance more adequately: See
Ä Chapter 6.6 ‘Mass balance’ on page 36.
Repairs
- 54 -