Instruction Manual

Ideal for comminution of:
Plastics and textiles Plastics, rubber, leather, mesh
wire, fibres
Agriculture and forestry Wood, leaves, roots, animal feed,
grain, corn, peat, tobacco
Environment Paper, cardboard, refuse-derived
fuel, metal-free refuse, household
waste
RoHS Unprinted circuit boards
Analysis Coal, horn, coated tablets, pills,
cork, drugs
Construction materials Refuse-derived fuel
Chemistry Heterogeneous mixtures
Food Maize, malt, pasta, herbs, spices,
dried meat
2.2.1 Operating principle
The material to be cut is moved in front of a plunger and fed into the
cutting chamber by means of a funnel. There, four rotating knives in
combination with three fixed knives cut the sample material. The cutting
chamber is closed at the bottom by a sieve insert. Comminuted material
is collected in a pot after it passes the sieve insert.
2.2.2
Drive motor
Driven by:
n 1~ 100 / 120 V motor,
n 1~ 230 V motor or
n 3~ 230 / 400 V motor.
A three-phase motor or single-phase motor without mechanical brake
serves as the drive.
2.3
Obligations of the operator
Before using the PULVERISETTE 15, this manual is to be carefully read
and understood. The use of the PULVERISETTE 15 requires technical
knowledge; only commercial use is permitted.
Safety information and use
- 8 -