User Manual

10 Examples of milling results
The following examples from our laboratory for technical applications
can be used as a reference for selecting the grinding elements and for
optimal usage of the PULVERISETTE 14.
Source material Amount (grams) Rotor Sieve ring Time (min.)
Polyvinyl alcohol 20 g 12 0.12 trapez. perf. 2
Polyvinyl alcohol 50 g 12 1.00 trapez. perf. 1
Polyester yarn 4 g 12 4.00 round perf. 1
Teflon (2 mm) 500 g 24 0.50 trapez. perf. 20
Rubber granulate 10 g 12 1.00 trapez. perf. 5
Glass fibre 10 g 8 0.12 trapez. perf. 2
Wool felt 30 g 12 1.00 trapez. perf. 2
Cotton 25 g 8 0.50 trapez. perf. 5
Almonds 60 g 12 1.00 trapez. perf. 1
Almonds 80 g 12 2.00 round perf. 3
Maize seeds 15 g 12 1.00 trapez. perf. 3
Maize seeds 140 g 12 1.00 round perf. 3
Cacao nibs 600 g 8 6.00 round perf. 5
Hops 35 g 12 0.20 trapez. perf. 5
Carrots 50 g 24 1.00 trapez. perf. 2
Dried plants 30 g 12 0.08 trapez. perf. 15
Bone 10 g 12 1.00 trapez. perf. 0.5
Calf teeth 20 g 12 1.00 trapez. perf. 3
Pellets 50 g 12 0.20 trapez. perf. 2
Plaster 250 g 12 0.50 trapez. perf. 2
Fertilizer 800 g 24 0.50 trapez. perf. 20
Phosphate 200 g 24 0.12 trapez. perf. 10
Coke 200 g 8 1.00 round perf. 3
Alumina 20 g 12 0.50 trapez. perf. 0.3
Sediments 50 g 12 0.20 trapez. perf. 2
Sludge (dry) 10 g 24 0.20 trapez. perf. 3
Examples of milling results
- 46 -