Owner's manual

3 Technical data
3.1
Dimensions
52 x 105 x 63 cm (width x depth x height)
3.2 Weight
228 kg without grinding disks (net)
246 kg with grinding disks made of tungsten carbide
3.3 Operating noise
Emissions value of workplace according to DIN EN ISO 3746:2005 L
Pa
=
68.9 dB(A). The noise level measurement was conducted with the
grinding stock: sand, grain size 0.5 - 2mm.
3.4 Voltage, current consumption, power consumption
Voltage 400V / 3~ 50Hz 230V / 3~ 60Hz
Current consumption 3.2 A 5.6 A
Power consumption 1830 W
under high load (significantly less
under normal application)
1800 W
under high load (significantly less
under normal application)
The device can only be operated on a three-phase power system.
Transient overvoltage according to overvoltage category II permitted.
(See also Ä Chapter 4.5 ‘Electrical connection’ on page 20)
3.5 Electrical fuses
A thermal circuit breaker (motor protection switch) is integrated into the
main switch (3) and triggers in case of overheating; after a brief cooling
period, it is ready to be restarted.
3.6 Material
n Maximum feeding size approx. 20 mm (depending on the material)
n Minimum feed quantity 20 - 30 ml
n Grinding by batches with collecting container (max. 2 l)
n Maximum throughput 150 kg/h during continuous grinding
Technical data
- 16 -