User Manual

Aluminium 1 pair of support walls 43.4040.13
POM 1 pair of support walls 43.4045.16
Model II
Material Designation Order number
Tempered tool steel Fixed crushing plate 43.3010.09
Movable crushing plate 43.3020.09
1 pair of support walls 43.4000.09
Chromium-free steel Fixed crushing plate 43.3011.09
Movable crushing plate 43.3021.09
1 pair of support walls 43.4010.09
Chromium-nickel stainless steel Fixed crushing plate 43.3030.10
Movable crushing plate 43.3040.10
1 pair of support walls 43.4020.10
Tungsten carbide (WC + Co) Fixed crushing plate 43.3050.08
Movable crushing plate 43.3060.08
1 pair of support walls 43.4030.08
Zirconium oxide Fixed crushing plate 43.3100.27
Movable crushing plate 43.3110.27
1 pair of support walls 43.4050.27
Manganese steel Fixed crushing plate 43.3130.23
Movable crushing plate 43.3140.23
Aluminium 1 pair of support walls 43.4040.13
POM 1 pair of support walls 43.4045.16
The crushing plates made of zirconium oxide are only suitable for
crushing medium-hard and brittle materials (or similar). Metal may not
be crushed under any circumstances.
The Cr-Ni steel equipment is recommended if damp material is crushed
and this would cause the plates and walls made of tool steel to rust.
The tungsten carbide equipment is recommended for crushing very hard
material or if ferrous contaminants are to be avoided.
Working with the laboratory jaw crusher
- 25 -