Operation Manual

13
▪ NEVER use separate timers or remote control systems.
▪ The appliance can only be used with 230V AC.
▪ For your own safety, the appliance will only work if it has been assembled correctly. Check that all parts were
assembled correctly.
▪ Only use this appliance for grilling/baking and raclette. Do not use it for other purposes or in combination with
other appliances.
▪ NEVER leave the appliance unattended and NEVER move it when it’s pluged in.
▪ Check the appliance and the power cord for any damage. In that case, do not use the appliance and return it to
the sales point in case of damage.
▪ NEVER let the cord hang over the edge of the table or the counter.
▪ NEVER take or move the appliance by the power cord. NEVER turn the power cord around the appliance.
NEVER bend it, squeeze it or pull it over a sharp edge.
▪ ALWAYS switch off the appliance and pull out the plug
*after use or when the appliance is not in use
*if the appliance doesn’t function properly
*when cleaning the appliance
▪ NEVER pull the power cord to unplug the appliance.
▪ NEVER use extension cords and ALWAYS unroll the cord completely.
▪ NEVER use the power cord in the proximity of sources of heat, such as ovens, stoves or heating.
▪ NEVER cover the appliance when it’s working.
▪ Only use original accessories.
▪ According to the legal safety prescriptions: only use earthed sockets.
▪ Repairs can only be executed by a recognized expert or a recognized repair shop.
2. BEFORE THE FIRST USE
▪ Remove all packaging and stickers. Keep all packing material out of reach of children.
▪ Before the first use we recommend to clean all components thoroughly:
o Grill plate and raclette pans: with hot water and detergent. Do not use abrasives or stiff washing-up
brushes.
o Natural stone:
▪ Clean it with a damp cloth and let dry
▪ Heat the natural stone in an oven of 220°C for 40 minutes
▪ Remove the natural stone from the oven wearing oven mitts and make sure to place the
natural stone on a heat resistant surface
▪ Let the natural stone cool down completely.
▪ Rub in the natural stone with heat resistant oil, like i.e. olive oil
o Let the frame heat up for about 10 min. and then let it cool off. Clean it with a damp cloth and dry it.
Do not immerse in water.
▪ Assemble the appliance correctly. (See ‘Assembly’).
▪ At the first use, there may be some odour or smoke release. This is perfectly normal and will disappear by itself.
▪ The appliance is now ready for use.
3. ASSEMBLY
▪ Do not plug in the appliance to assemble it.
▪ Place the docking station with one half oft he frame on a flat, stable surface.
▪ Then place the other half (by the side of the ON/OFF button) of the frame on the contact point of the docking
station, even if you only plan to use 1 half!
▪ Place the baking plate (choose flat side or grill side)and the natural stone on the frame.
▪ Both frames can now be turned to 180°.
▪ The frames can be used together or separately => 2 separate ON/OFF buttons with pilot lamp.
▪ During baking/grilling, the frames may not be removed from the docking station.