User Guide

Figure 27 - Settings Menu
Choose Change connection.
The following screen opens.
Figure 28 – Select access point
2. Select the desired access point and press Select using your left soft key.
As soon as the connection is confirmed, you will be connected to the
desired access point.
Note: If the connection is not confirmed, the screen in
Figure 28 appears
so that you can select a different access point.
Choosing whether fring runs
automatically on startup
You can decide whether you would like fring to run automatically on startup.
¾ To change whether fring runs automatically on startup or not:
1. From the Options menu choose Settings.
The following menu opens:
25 Page