Owner Manual

ManualsBrandsFrigidaire ManualsColumn Refrigerator & Freezer SetFrigidaire Professional Series FRREFR3

CONTROLS AND SETTINGS

Alarms

Controls

DOOR OPEN

This alert indicates the door has been open for 5 minutes or more. The DOOR

OPEN LED will illuminate and the audible alert will sound until the door is closed.

The audible alert can be turned o by pressing the DOOR OPEN key or by clos-

ing the door. If the door is ajar for 5 minutes, the interior light will turn o.

POWER OUTAGE

The POWER OUTAGE indicator light informs you there has been a power inter-

ruption which could have led to the internal temperature incresing beyond the

safe temperature range. After you check your food, reset the alarm by pressing

POWER OUTAGE.

HIGH TEMP

If the temperature increases above a safe temperature range, the red HIGH

TEMP LED light will illuminate and the alarm will sound. Reset the alarm by

pressing HIGH TEMP.

The lock button can be used to lock the control panel. Press and hold for 3 sec-

onds to enable. While in the locked state, no changes can be made until unlocked.

Press and hold for 3 seconds to disable.

The settings icon illuminates upon opening the appliance door. Press the set-

tings icon to reveal other function icons. After 10 seconds of non use of icons or

door closure, all icons will fade except the settings icon.

Adjusting Temp

To adjust the temperature setting, press + to raise the temperature and - to

lower the temperature on the appliance control. Allow several hours for the tem-

perature to stabilize between adjustments.

TEMP °F/°C

Short press to toggle between Fahrenheit (°F) and Celsius (°C).

CHILL BOOST

Turning on CHILL BOOST will cool the appliance down to a target temperature

and will remain active for up to 24 hours before automatically deactivating or

being manually exited. To turn the function on/o, press CHILL BOOST. When

you turn o CHILL BOOST, it will automatically reset the refrigerator back to

the previous temperature setting.

AIR FILTER

The AIR FILTER replacement alert will illuminate when it is time to replace the

air ﬁlter. See the FILTER REPLACEMENT

section for instructions on how to

replace the air ﬁlter. After changing the air ﬁlter, reset the AIR FILTER alert by

pressing and holding AIR FILTER.

WATER FILTER

The WATER FILTER replacement alert will illuminate when it is time to replace

the water ﬁlter. See the FILTER REPLACEMENT

section for instructions on how

to replace the water ﬁlter. After changing the water ﬁlter, reset the WATER

FILTER alert by pressing and holding WATER FILTER.

WATER DISP

The illuminated WATER DISP LED means the internal water dispenser is ON.

Open the internal water dispenser by pushing the push-push nozzle. Press the

water dispenser paddle inside the cabinet to dispense water. Turn the dispenser

o by pressing and holding WATER DISP for 3 seconds. When the water dis-

penser is o, you cannot dispense water. You will hear a beep if you try to press

the paddle without WATER DISP being turned on. Press and hold WATER DISP

to turn it on.