User manual

Charcoal filter
 The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
 To do this you will need an original
FRIGIDAIRE charcoal filter (available from
your local Service Force Centre).
 This filter cannot be cleaned or reused.
 As a general rule, the activated charcoal
filter should be changed once every four
months.
 Fitting  Fig. 4
Fit one charcoal filter on the left and one on the
right so to cover the plastic grids that protect
the fan wheel, then turn clockwise the central
handle of the charcoal filter.
 To remove proceed in the reverse order.
 Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
 The charcoal filter can be ordered from your
local FRIGIDAIRE Service Force Centre.
Changing the light bulb
 Disconnect the cooker hood from the main
supply.
 Remove the lamp cover.
 Replace the old bulb with a new one of the
same type.
 Remount the lamp cover.
 If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting your local Service Force Centre.
Technical assistance service
You are welcome to telephone our technical
assistance service (see list of technical assistance
centres) whenever you need information or in
the unlikely event of a fault.
For service in Australia call 1300 650 020.
When calling, please be ready to specify:
1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)
This information is shown on the registration
plate inside the unit behind the grease filter.
We reserve the right to change specifications and
colours as a result of our policy of continuing
technological development.
Fig. 4