Owners Guide

46
CARE AND CLEANING
Replacing the Oven Lights
The oven light bulbs are located at the rear of the
oven cavity and both are covered with a glass
shield. The glass shield must be in place whenever
the oven is in use.
Replacing the interior light bulbs:
1. Turn electrical power o at the main source or
unplug the range.
2. Remove carefully oven interior light shield.
3. Replace bulb with a new T-4 type 25 Watt
Halogen appliance bulb. Please note: Do not
allow your fingers to touch the new bulb when
replacing. This will shorten the life of the new
bulb. Use a paper towel to cover the new bulb
when installing.
4. Replace glass shield over bulb.
5. Turn power back on again at the main source
(or plug the range back in).
6. The clock will then need to be reset.
Removing the Storage Drawer
Use the storage drawer for storing cooking
utensils. The drawer can be removed to facilitate
cleaning under the range. Use care when handling
the drawer.
CAUTION
Be sure the range is unplugged and all parts are
COOL before replacing oven light.
Wear a leather-faced glove for protection against
possible broken glass or burns.
Figure 22: Removing the glass shield
Figure 23: Storage drawer open
Figure 24: Storage drawer closed