Manualshelf

Owners Guide

ManualsBrandsFrigidaire ManualsCooking Appliances30 Inch Freestanding Electric Range with 5 Elements, 5.4 Cu. Ft. Oven Capacity, Storage Drawer, Air Fry, True Convection, Quick Preheat, Self Clean, Quick Boil, SpacePro™ Bridge Element, UL Listed, ADA Compliant, and Star-K Certified
11121314151617181920
15
BEFORE SETTING SURFACE CONTROLS
Types of Ceramic Cooktop Elements
The circles on the ceramic glass cooktop outline
the size and type of element underneath. The ele-
ments on your cooktop depend on the model.
• A single radiant element has one circle.
• A dual radiant element has two circles. The dual
element may be set using just the smaller inner
element or both inner and outer elements for a
larger cooking surface.
Element On and Hot Surface Indicator
Lights
The ELEMENT ON indicator light will turn on when
one or more elements are turned on. A quick
glance at this indicator light when cooking is fin-
ished is an easy check to be sure all surface ele-
ments are turned o.
Figure 3: Single and double elements
The HOT SURFACE indicator light will turn on when
the burner is hot enough to cause burns and will
remain on after the burner is turned o until the
surface has cooled to a safe temperature.
Figure 4: Keep Warm Zone
Figure 5: Space Pro
Figure 6: Indicator lights
• A keep warm element has one small circle. It
is used to keep food warm after cooking. The
keep warm element is not designed to cook
food but to keep food at serving temperature.
It is located in the rear (middle) of the cooktop.
The Space Pro has two single elements that can be
set independently using separate knobs.
The Space Pro can also be set to connect both
single heating zones for oversize cookware.
CAUTION
Surface elements may appear to have cooled
after they have been turned o. The element sur-
face may still be hot, and burns may occur if the
element or surrounding area is touched before it
has cooled to a safe temperature.
ELEMENT ON HO
T SURFAC
E
ELEMENT ON HOT SURFACE