Installation Instructions All Languages

1. Install the outdoor part of the unit
on a rigid surface to avoid excess
noise and vibration.
2. Direct the air vent toward an area
without obstacles.
especially in areas where it is
frequently windy.
4. If the installation site is exposed to
heavy winds, such as in coastal
areas, place the unit along the
widest part of the wall or use
protective plates.
requirement in the installation
bracket diagram. The installation
wall should be solid brick, concrete
or the same intensity construction,
supporting should be taken.
The connection between bracket
and wall, bracket and the air
conditioner should be firm,
stable and reliable.
6. Be sure there is no obstacle which
Outdoor unit installation
Strong wind
Outdoor unit installation
3. Install the unit at the site where it is
exposed
to as little wind as possible,
or action to reinforce, damping
schrubs or bushes.
blocks radiating air, including
14
5. If suspended installation is needed,
local or servicer. The installation
purchase kit No.EA140S from your
bracket should accord with technique