Trim Kit Installation Instructions

INSTRUCTION SHEET
©2021 Electrolux Home Products, Inc. Instruction Sheet A00343906 9.30.21
11
Leveling System Installation
1. a. Lay the refrigerator and
freezer on their backs
on packing material
or a drop cloth to
prevent damage and
protect the floor.
Instructions for Dual Installation Trim Kits:
TRMKTEZ2FL75 (Frigidaire)
TRMKTEZ2LV79 (Frigidaire)
TRMKTEZ2FL79 (Frigidaire)
TRMKTSS2FL79 (Electrolux)
TRMKTSS2LV84 (Electrolux)
b. Remove all 4 rear leg
levelers from the 2 units by
unscrewing
counterclockwise (Fig.
1A), and store them with
your Product Literature.
c. Remove all 4 front leg
levelers from the 2 units
by unscrewing the outer
peg and 2 bolts on each
front leveler with a
5
/
16
” nut driver and
store them with your
Product Literature.
Remove the hinge cover
if it is installed (Fig 1B).
Fig. 2
2. Lay the parts out on a
cleared area face down. Be
sure to place a drop cloth
over the floor to prevent
scratching the trim kit and/or
floor (Fig. 2).
A
Fig. 1
B
CAUTION
Appliances are heavy. Installation requires two people.
IMPORTANT
Make sure there are two separate outlets for the freezer and the refrigerator.
Power and Water Line Connection

NOTE
If freezer unit is compatible with water filter kit, please see filtered
water kit instructions.

NOTE
Refer to the Use & Care Manual for power requirements and water
supply hookup before proceeding. Find Service Kit TTFLTRICEKIT at
ElectroluxAppliances.com for connecting the water line and filtering ice.