Owner's Guide

13
Upper-Level Lighting (some models)
The upper level lighting comes on
automatically when the door is opened.
IMPORTANT
To disconnect power to the unit, unplug
the unit or switch the breaker that supplies
power to the unit to the off position.
Replace the old bulb with a bulb of the
same wattage.
To replace the light bulbs:
1. To replace the light bulb, turn the
temperature control to OFF and unplug
the electrical cord.
2. Remove the light shield by pushing in on
the sides where the two tabs are located
in the back, then rotate the light shield
down and out.
3. Replace the old bulb with a bulb of the
same type and wattage.
LED Light Removal
LED Light Harness Removal

NOTE
LED lights are in series, so if one is bad or
unplugged, several lights may not light up.
INTERIOR LIGHTING
puerta entreabier ta corte de energí a
reemplace el ltro de aire
mantenga presionado
para reinicia r
ltro
de aire
modo
°F-°C
reinicio
de aler ta
traba
de cont rol
mantener
presionado
Light Shield
Light Shield Tabs
4. When replacing the light shield, insert
the three tabs in the front of the light
shield into the slots in the control box and
then rotate the rear upward until the two
retaining latches lock into place.
SpaceWise™ Glass Shelves
Multi-position adjustable slide out glass shelves
can be moved to any position for larger or
smaller packages. The shipping spacers that
stabilize the shelves for shipping may be
removed and discarded.
To Adjust The Shelves
• Lift front edge up.
• Pull shelf out.
• Replace the shelf by inserting the hooks
at rear of the shelf into the wall bracket.
Lower the shelf into the desired slots and
lock into position.
STORAGE FEATURES
Insert into
slots