Complete Owner's Guide

9
PRO-SELECT™ Electronic Control Features
Replace Air Filter
When the “REPLACE AIR FILTER” LED is illuminated yellow, the air lter needs to be replaced.
The control will signal for air lter replacement after 3600 hours of refrigerator operation. After
replacing the air lter, reset the air lter timer by pressing the AIR FILTER key for 3 seconds. The
“REPLACE AIR FILTER” LED will be illuminated green for 3 seconds, conrming a timer reset.
°F
ELECTRONIC CONTROL
°F
Control Lock
To disable the keypads on the control, begin by pressing the CONTROL LOCK key for 3 seconds
until “LO” is displayed for 1 second. With the control locked, when keys are pressed on the
control panel, “LO” will be displayed. To unlock the control, press the CONTROL LOCK key for 3
seconds. The display will show “UL” for one second.
To turn the refrigerator OFF, press the UP () key until the warmest temperature setting of
46°F (8°C) shows in the display. Then press the UP () key 3 times within 3 seconds to turn
the refrigerator OFF. The display will then show “OF”. To turn the unit back ON, press the
DOWN () key 3 times within 3 seconds. The control will then display “46°F (8°C)” and may be
adjusted to the desired temperature.
°F
°F
HRS
HI-TEMP DURATION
Power Fail
The POWER FAIL indicator light informs you that due to a power failure, the cabinet temperature
exceeded 55°F (13°C). If the power failure lasted more than 1 hour, the display alternates
between showing the power failure duration (Hours and DURATION LED illuminate in the
display) and the cabinet temperature (°F or °C illuminates) every ½ second. This safety feature
will aid in determining what food spoilage action to take.
The Power Fail indicator light and duration display can be turned off by pressing Alert Reset.