Use and Care Guide

36
CARE AND CLEANING
Removing and Replacing the Oven Door
To remove the oven door:
1. Open oven door completely, horizontal with floor.
2. Pull up the lock located on each hinge support toward
front of the oven until the lock stops. You may have to
apply a little upward pressure on the lock to pull it up
(
Figure 29 and Figure 30).
3. Grasp the door by the sides, and close the door until the
door frame makes contact with the unlocked hinges.
4. Pull the bottom of the door toward you while rotating the
top of the door toward the appliance to completely
disengage the hinge levers (
Figure 31).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (
Figure 31).
2. Hold the oven door at the same angle as the removal
position. Carefully insert the hinge levers into the oven
frame until you feel the hinge levers are seated into the
hinge notches. The hinge arms must be fully seated into
the hinge notches before the oven door can be fully
opened. (
Figure 31).
3. Fully open the oven door, horizontal with floor
(
Figure 28).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the
locked position (
Figure 29).
5. Close the oven door.
Special door care instructions - The door is heavy. For
safe, temporary storage, lay the door flat with the inside
of the door facing down.
Most oven doors contain glass that can break. Do not
close the oven door until all the oven racks are positioned
correctly in the cavity. Do not hit the glass with bakeware
or any other objects. Scratching, hitting, jarring, or
stressing the glass may weaken its structure, causing an
increased risk of breakage at a later time.
IMPORTANT
Figure 28: Door hinge location
Figure 29: Door hinge locked
Figure 30: Unlocking door hinge
Figure 31: Remove door position
Oven door
hinge
locations
Door frame flush
with hinge lock
Hinge
notch