Use and Care Guide

28
SETTING OVEN CONTROLS
To program oven to Bake with default oven temperature
of 350°F and activate the Sabbath feature:
1. Be sure the clock is set with the correct time of day.
2. Arrange oven racks, place bakeware in oven, and close
oven door. Press Bake.
3. Note: If Delay Start is desired enter the timeat this point.
See
“Setting Delay Start” on page 19 for detailed
instructions.
4. Press OK/START.
5. Press and hold Self Clean and Delay Start simultane-
ously for about 3 seconds to set the Sabbath feature.
Once the feature is set, SAb will appear in the display
indicating the oven is properly set for the Sabbath
feature (
Figure 19).
To turn the oven off and keep the Sabbath feature
active:
1. Press OFF.
To turn off the Sabbath feature:
Press and hold both Self Clean and Delay Start simultane-
ously for at least 3 seconds to turn the Sabbath feature off.
The control will provide an acceptance tone, and SAb will
disappear from the display. The oven is no longer
programmed for the Sabbath feature.
What to do during a power failure or power interruption
after the Sabbath feature was activated:
Should you experience a power failure or interruption, the
oven will shut-off. When power is restored the oven will not
turn back on automatically. The oven will remember that it is
set for the Sabbath, and the oven display will show the
message SF for Sabbath failure (
Figure 20).
The food may be safely removed from the oven while still in
the Sabbath feature, however the oven cannot be turned
back on until after the Sabbath/Holidays. After the Sabbath
observance turn off the Sabbath feature.
Press and hold both Self Clean and Delay Start keys for at
least 3 seconds simultaneously to turn the Sabbath feature
off. SF will disappear from the display, and the oven may be
used with all normal functions.
Figure 19: Oven set for Sabbath baking
Figure 20: Display showing Sabbath failure