Installation

Existing Frigidaire sleeves may have older single sided intake grilles
New Dual Intake Grille
IMPORTANT
This units increased performance characteristics is the result of having two rear intakes.
If there is an existing sleeve and rear grille, it should be replaced with the one shipped with the unit in the
accessory kit.
It is very important that these installation instructions are followed so your unit can operate at maximum efficiency.
1. Remove the existing grille and save the mounting
screws.
2. Place the grille included with your new air conditioner
towards the inside rear of the sleeve.
3. Attach the new grille by aligning the four mounting
holes.
4. Re-insert the self-tapping screws into the nylon
retainers.
• These grilles should be replaced with the dual intake grille supplied with the air conditioner.
Left Intake Grille
Left Intake
Right Intake Grille
Right Intake
3
Installation Instructions