Installation guide

Installation Instructions
2
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly- QTY 1
2. Exhaust Duct - QTY 1
3. Bottom
Mounting Rail– QTY 2
3. Screw A - QTY 11
4. Screw B - QTY 4
CHOOSING A LOCATION FOR
YOUR MICROWAVE OVEN IF
BUILT-IN
Built-In Trim Kit allows for the installation of microwaves
listed below to be built into a cabinet or wall by itself or
over an electric wall oven*.
Microwave Models:
FFMO1611LW, FFMO1611LB, FFMO1611LS
See Illustration 1 for proper location and when building
in above a wall oven. Carefully follow both the wall oven
installation instructions and Electrolux’s Built-in Kit
instructions. If building over a wall oven, be sure the
clearance between the wall oven and the microwave
oven is a minimum of 3 inches.
*NOTE: Trim Kit and microwave can only be built-in
over an electric self-clean or non self-clean
single cavity wall oven.
CABINET OR WALL CUTOUT
Cutout Dimensions
Height (A)
Minimum
Maximum
17” (432 mm)
17
1/4
”(438 mm)
Width (B)
Minimum
Maximum
24
3/4” (629 mm)
25” (635 mm)
Depth (C)
Minimum 20” (508 mm)
Illustration 1
Trim Kit Overall Dimensions
27”
30”
Height
18 1/8（460mm） 18 1/8（460mm）
Width
26 15/16（684mm） 29 15/16（760mm）
Depth
1 1/16（26.8mm） 1 1/16（26.8mm）
Bottom Mounting Rail
Front Frame Assembly
Exhaust Duct