Owner Manual
Table Of Contents
- Introduction
- Important Safety information
- Features (Frigidaire)
- Features (Frigidaire Gallery/Professional)
- Installation
- Door Removal
- Door Handle Installation (some models)
- Water Supply Connection
- Ice Maker
- Controls and Settings
- Storage Features
- Normal Operating Sounds
- Filter replacement
- Care and Cleaning
- Troubleshooting
- Limited Warranty
15
DOOR HANDLE INSTALLATION (SOME MODELS)
To reverse the door handles:
2.  Remove 
the name 
plate on the 
freezer door.
3.  Remove the 
shoulder 
screw on 
the opposite 
side of the 
freezer door 
and install 
the shoulder 
screw where 
the name 
plate was 
removed 
using an adjustable wrench or 
Phillips head screwdriver. 
4.  Install the 
name plate 
on the 
opposite 
side of the 
freezer door. 
CAUTION
Be sure the doors are set aside in a 
secure position where they cannot fall 
and cause personal injury.
The handles may be easier to reverse 
while the doors are o. 
1.  Unscrew 
and remove 
the handles 
5.  Remove the 
button plugs 
from the 
front and 
top of the 
refrigerator 
door.
6.  Remove the 
shoulder 
screw on 
the left side, 
and install 
the shoulder 
screw on 
the opposite 
side of the 
door using an adjustable wrench or 
Phillips head screwdriver.
7.  Install the 
button 
plugs on the 
opposite side 
of the front 
and top of the 
refrigerator 
door
8.  Reverse and 
attach the 
freezer and 
refrigerator 
handles as 
shown.










