CHEST FREEZER FC 105 OPERATING AND INSTALLATION MANUAL GB 820 41 80 80
Make sure that the power plug is not squashed or damaged by the back of the fridge/freezer. - A damaged power plug may overheat and cause a fire. Do not place heavy articles or the fridge/freezer itself on the power cord. - There is a risk of a short circuit and fire. Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche. - Damage to the cord may cause a short-circuit, fire and/or electric shock.
TEMPERATURE CONTROL The thermostat ensures that the required temperature is maintained in the freezer. Turning the thermostat button towards no. 7 makes the temperature in the freezer colder, and turning the button towards no. 1 makes the temperature warmer. The correct setting can be found by measuring the temperature of the top package in the middle of the freezer. This should not have a temperature higher than –18°C.
WHEN NOT IN USE Disconnect the appliance from the electricity supply. Remove all goods from the freezer. Clean the freezer as described above. Leave the lid slightly open. IF YOUR FREEZER DOES NOT FUNCTION SATISFACTORILY Check the following before calling for service staff: Defect: Possible cause: Action: Freezer not cold enough Plug not connected correctly Defect in switch or fuse Power failure Lid in contact with goods in freezer Moisture from washing machine, tumble-dryer, etc.
