User Manual

8
PRODUCT INSTALLATION AND USAGE
Remove the product from the packaging and review the
instructions along with any other included accessories. The unit
can be used immediately after being removed and unpacked.
CONTROL PANEL USE
There are 6 function buttons on the main panel (left to right
above):
SWING: enables the vertical louvers to oscillate automatically
TIMER: set auto-off timer to 1 hour, 2 hours, 4 hours or 8
hours
EVAPORATIVE COOLING: choose between evaporative
cooling and fan-only mode
MODE: choose between normal, nature or sleep modes.
SPEED: choose fan speed; low, medium or high.
POWER: turn the unit on and off.
Note: When first turned on, the unit will run at medium fan speed
for a few seconds, then default to low. The LED indicators will
dim slightly after 60 seconds without any buttons being pressed.
SWING
When the unit is on, press the swing button to enable the
oscillation feature. The vertical louvers will oscillate
automatically back and forth 80 degrees in total. In addition, you
can manually adjust the horizontal louvers on the front of the
unit. To disable the oscillation feature (which can be done while
the vertical louvers are at any position along the 80 degree arc),
just press the swing button again.