User Manual

13
OUTER SURFACE CLEANING
1. Unplug the unit.
2. Clean the surface of the unit and wipe it off with a damp cloth.
Do not rinse the unit directly with water, or use corrosive
detergents.
MAINTENANCE
1. When the unit is not going to be used for a long time, unplug
the power, pack the unit for storage, and prevent dust buildup
by packing the unit into its original box, or covering it with a
sheet.
2. Before storing, ensure that the dust filter and cooling pad are
completely dry. If either are still wet, run the drying cycle by
pressing and holding the speed button until the high fan speed
LED starts flashing. The cycle will run for 20 minutes, then the
unit will shut off.
3. Store the unit in a dry and well-ventilated area.