Quick Start Guide
started
FREEZER REFRIGERATOR
WITH YOUR TOP
GETTING
A20690101 (2103)
YOU’RE IN CONTROL
Your Controls
It’s easy! When first turning your appliance on, adjust the controls to the factory set Recommended. After
24 hours, adjust the controls in small increments, allowing the temperatures to stabilize. The refrigerator
control changes temperatures in both the refrigerator and the freezer. The freezer control moves the
damper in the freezer. Adjust the freezer control toward Cold to open the damper, making the freezer
temperature warmer. Adjust it toward Coldest to close the damper, making the freezer colder.
REMEMBER
• For the best circulation, do not block the cold air vents
with food.
• Your movable door bins can be personalized to fit your
family favorites and most used items.
• Your full-width deli drawer oers you another storage
option that is conveniently located so you have easy
access to foods such as deli meat and cheeses.
1
Press the Temp button on the refrigerator control
to scroll through the 5 temperature settings.
For colder temps adjust toward Coldest, and for
warmer temps adjust toward Cold.
2
Both the refrigerator and freezer controls can
be left at the factory preset (Recommended) or
adjusted as desired.
3
The air filter status light will prompt you to replace
the filter after 6 months. After replacing the air filter,
press and hold Air Filter for 3 seconds to reset.
Freezer Control
2
1
2
3
Refrigerator Control
BEFORE YOU START
SET UP YOUR REFRIGERATOR
Remove the tape and glue residue from surfaces before turning on the refrigerator. Choose a place near a
grounded electrical outlet, allowing for clearances for ease of installation, proper circulation, and plumbing
and electrical connections.
BEFORE OPERATING FOR THE FIRST TIME
After you remove all of the package materials, clean the inside of your refrigerator before using it .
See the CARE AND CLEANING section in your Use & Care Manual.